A flat, even surface is essential for a long-lasting floor finish. Whether you’re laying tiles, polishing concrete, or installing timber, every flooring job begins with proper floor levelling. Uneven floors can lead to cracks, movement, or poor adhesion – the first step should always be checking and correcting the base.
At FKR Constructions, we help Melbourne homeowners and businesses correct these issues with precision, care, and over 20 years of experience.
Signs Your Floor Needs Levelling
Some floors show visible signs of being uneven. You may notice cracks, dips, slopes, or edges that don’t align. Other times, it’s less obvious until you try to lay flooring and encounter problems with gaps, creaks, or lifting.
Common indicators include:
- Cracked tiles or peeling vinyl
- Floors that slope noticeably to one side
- A marble or ball that rolls in a consistent direction
- Dips and low points that trap water or dust
- Uneven transitions between rooms or surfaces
If any of these issues sound familiar, floor levelling should be the next step before installing new materials.
How the FKR Team Levels Uneven Floors
At FKR Constructions, we take a structured approach to every levelling job. First, we inspect the surface and identify the key issues. Then we prepare the area by removing dust, glue, or debris that could affect the bond. We use high-strength levelling compounds that are suitable for all types of flooring, including concrete, cement, timber, and tile.
Our compounds are designed to flow evenly across the surface. They fill in dips and smooth out high points to create a level base. Once cured, the surface is ready for tiles, polish, timber, or carpet.
Tip 1: Choose the Right Levelling Compound
Not all compounds are the same. We select the right mix based on the flooring material, foot traffic, and conditions. For high-traffic areas or heavy furniture, we use a high-strength option that resists compression and movement. For timber or vinyl floors, we may choose a more flexible base that reduces the risk of cracking.
Each compound comes with different drying times, spread rates, and application methods. That’s why we match the product to your goals instead of using a one-size-fits-all solution.
Tip 2: Prepare the Surface Properly
Surface prep is essential for a good finish. We clean the floor to remove dirt, grease, and previous coatings. A clean base helps the compound bond properly and prevents bubbling or failure.
For concrete slabs, we use grinders to remove glue or paint. For timber subfloors, we secure loose sections and fill gaps before applying the compound. Every surface is tested for moisture using a specialised meter, since too much water in the substrate can cause long-term damage to your flooring.
Technique 1 – Self-Levelling Compound Application
Our preferred method uses a self-levelling chemical mixture that spreads naturally across the surface. It finds low points and fills them in, creating a consistent, flat base without heavy manual work. We use gauge rakes and spiked rollers to help the mixture spread and settle evenly. This technique is efficient and produces reliable results on both small and large jobs.
Technique 2 – Laser Level Calibration
For large commercial or industrial spaces, we use laser level tools to measure floor flatness. These devices ensure the floor is level within millimetres across long distances. This technique is especially useful for retail fit-outs, warehouses, and polished concrete jobs where visual and structural performance are equally important.
Tip 3: Understand Curing and Drying Times
Different compounds have different drying times. Some set within a few hours, while others take longer. Rushing the process can affect the end result. We follow product instructions carefully and confirm the floor is fully dry before any flooring is applied. In most cases, we recommend waiting 24 to 48 hours, depending on the environment and thickness of the pour.
Tip 4: Allow Room for Expansion
Expansion joints are necessary in some concrete floors to reduce stress and avoid future cracking. We plan for these in advance and use flexible compounds where movement is likely. This ensures that even with changes in temperature or load, your floor stays in good shape.
Why Melbourne Clients Choose FKR
With over 20 years of industry experience, our team brings skill, reliability, and clear communication to every job.
We provide both residential and commercial services and work with a wide range of flooring materials. All our levelling services come with a full warranty, and we’re committed to delivering a positive experience from start to finish. Clients often tell us they appreciate our attention to detail, helpful advice, and the high-quality results we deliver.
You can see our recent work across Melbourne on our projects page.
Book Your Floor Levelling Service Today
Ready to fix uneven surfaces and prepare for your next floor installation? Let’s talk.
Our team is available to provide advice, quotes, and site visits.
You can contact us here or call 1300 570 888 to speak with someone directly.